AEROSOL SPRAY
Step 1
Shake can vigorously for one minute after the mixing ball begins to rattle. Remember to shake often during use. Hold can upright 10-12” from surface and spray in a steady back-and-forth motion, slightly overlapping each stroke. Continue to keep the can in motion while spraying.
Step 2
For hard to reach areas, the convenient aerosol can spray upside down to hit the lip on the underside of the truck bed sidewall.
Step 3
For best results, apply 2 coats, allowing 1-2 minutes between coats. Remove any overspray from the auto finish immediately.
Step 4
Allow 72 hours for full cure before placing objects in the truck bed.